| Type | size | fixing hole | |||||||||||||
| d | D | H | H1 | H2 | C | d1 | dn | dm | inner ring | outer ring | |||||
| unit:mm | do | ds | Ts | QTY 4) | dL | QTY 4) | |||||||||
| mm | mm | ||||||||||||||
| YRT260 | 260 | 385 | 55 | 36.5 | 18.5 | 18 | 345 | 280 | 365 | 9.3 | 15 | 8.2 | 34 | 9.3 | 33 |
| Type | Screw connection QTY | Connect screws holes | Pitch1)t | Tightening torque of screw | Basic load rating | Limited speed5) | Friction Moment3) | weight | ||||
| Axial | Radial | |||||||||||
| Dynamic | Static | Dynamic | Static | |||||||||
| MA2) | Ca | Coa | Cr | Cor | Grease | |||||||
| G | QTY | QTYXt | N m | KN | r/min | Nm | ≈Kg | |||||
| YRT260 | 2 | M12 | 3 | 36*10° | 34 | 160 | 1060 | 93 | 290 | 200 | 20 | 18.3 |
YRT260 Rotary table bearings YRT260 structure:Inner ring, Outer ring, the second inner ring, rolling elements, cages.
YRT260 Rotary table bearings YRT260 precision: P4(runout≤6μm); P2(runout≤3um)
YRT260 Rotary table bearings YRT260 torque: Normally YRT150 axial and radial combined bearings are preloaded before leaving the factory, it is necessary for customer to tell us the requirement torque, then we will adjust it to the right torque before leaving factory.
Any demand, Pls ask Anna: bearing3@hyzcgroup.com
