Before installation, clean some parts such as the bearing seat or shaft that match the bearing, remove oil dirt and impurities, and confirm that there are no burrs or burrs. Be sure to confirm that the matching tolerances of the bearing seat inner diameter, bearing outer diameter, journal and bearing inner diameter meet the requirements.

When installing the inner ring, be sure to ensure that the rolling element cannot bear force, and gently tap the end face of the inner ring with a plastic hammer until the sound can be judged that the end face of the inner ring is in complete contact with the mating end face; when installing the outer ring, refer to the installation requirements of the inner ring.

RV reducer bearings need to be installed in pairs. During the assembly process, the customer adjusts the preload force of the bearings. The appropriate preload force can make the bearings rigid to the best state after assembly and can withstand bidirectional axial force, radial force, etc. force, overturning moment and other loads in various directions.