The standard bearing model size table is a comprehensive reference material containing various bearing models and their size parameters. It is of great significance for the selection, design and installation of bearings. Through the standard bearing model size table, we can quickly and accurately find the required bearing model and its size parameters, which facilitates engineering design and production.

Standard bearing model size table is usually compiled according to international standards, which contains the model, size, load capacity, speed limit and other parameters of various common bearings. The following is an example of the content of a common standard bearing model size table:

1. Model: Lists the models of various bearings, such as deep groove ball bearings, tapered roller bearings, thrust ball bearings, etc.

2. Inner diameter (d): Indicates the diameter of the inner ring of the bearing, usually in millimeters (mm).

3. Outer diameter (D): Indicates the diameter of the outer ring of the bearing, also in millimeters (mm).

4. Width (B): Indicates the width of the bearing, also in millimeters (mm).

5. Load capacity: Includes rated dynamic load and rated static load, used to guide the applicable scope and load capacity of the bearing.

6. Speed limit: Indicates the maximum speed limit of the bearing under specific conditions, in revolutions per minute (rpm).