The joints of the inner or outer rings of the turntable bearing may deviate slightly. Before we install the bearing into the bearing seat, we need to loosen the bolts that fix the inner or outer ring, and then use a plastic hammer to correct it before installing it so that the bearing fits perfectly with the bearing seat.

When installing or removing the turntable bearing, do not apply external force to the connecting bolts to prevent damage to the bearing.

When installing the bearing, we also need to pay attention to the dimensional tolerances of the bearing and the mounting parts, so that the side clamping flange can firmly clamp the inner or outer ring from the side.

The turntable bearing needs to maintain sufficient preload, so under working conditions, the bolt preload needs to be checked once every operating hour, and then checked once every operating hour, and the bolts should be replaced every year or after working hours.

When the bearing is used in dusty and humid areas, it is necessary to perform regular inspections and lubrication according to the specific usage conditions. The bearing should be replaced with new grease before and after a long period of inactivity. When lubricating the bearing, the raceway must be filled with grease every time, and then the bearing is slowly rotated to allow the bearing to be fully and evenly filled.