In the application practice of bearings, I often encounter some questions from customers about clearance. Today, I will summarize a few for your reference.

Can I buy bearings with larger clearance?

In general applications, such as fans, bearings with larger clearance grades can be used without significant impact on bearing service life or machine operating conditions.

Can I buy bearings with smaller clearance?

No, it is not recommended to replace one bearing with another bearing with a smaller clearance grade without technical research, because there is a risk of over-preloading during operation. As an emergency solution, the clearance of the bearing can be increased by reducing the raceway diameter of the inner ring. Depending on the location and method, the bearing performance (friction, running accuracy, fatigue life) may be reduced and far from the original design parameters.

Yes. Depending on the lubricant base oil viscosity and the amount of lubricant, the bearing temperature may be different, and the temperature difference between the inner and outer rings will be different. If it is not verified, there is a certain risk to hastily change from oil bath to grease lubrication.

The equipment vibrates strongly. Should I change the bearing with smaller clearance?

The clearance is rarely the cause of vibration. Installing a bearing with less clearance does not eliminate the cause of the vibration. The cause of the vibration should be investigated and corrective action taken based on the cause understood. In addition, installing a bearing with less clearance may present a risk of premature failure due to excessive preload.