The divided inner ring or outer ring cannot be separated after being fixed with bolts and nuts, and can be directly installed in the bearing seat for use. At the same time, if the isolation block in the bearing is assembled incorrectly, it will have a great impact on the rotation performance and the force of the rolling element, so please do not disassemble the bearing casually.

The joints of the inner ring or outer ring sometimes deviate to some extent. Before installing the bearing seat, loosen the bolts that fix the inner ring or outer ring, correct them with a plastic hammer, and then install them.

When installing or removing, please do not apply external force to the connecting bolts.

Please pay attention to the dimensional tolerance of the installed parts so that the side clamping flange can firmly press the inner ring or outer ring from the side.