For equipment such as crossed roller bearings, high precision requirements are often required. Once the installation, use method or maintenance is improper, various problems may arise. For example, when the crossed roller bearing is used, there is a problem of excessive shaking. What is going on? Let's analyze the reasons briefly. The main reasons for the shaking of the crossed roller bearing are as follows:

1. The installation bolts are loose, causing shaking during operation. When the crossed roller bearing shakes during operation, all the inner and outer ring mounting bolts should be checked immediately. Check whether there is any looseness and tighten it as required.

2. The steel structure supporting the crossed roller bearing is not rigid enough, and elastic deformation occurs during loading, causing the overall shaking of the crossed roller bearing, increasing the strength of the steel structure supporting the crossed roller bearing by 14 times.

3. Check whether it is overloaded. Overloading will also cause the crossed roller bearing to shake. Therefore, it is necessary to operate strictly according to the regulations.

4. Long-term overloading will cause the raceway to collapse and the gap to be too large. In such a situation, please notify the after-sales service of the crossed roller bearing in time for adjustment to ensure the normal use of the crossed roller bearing. In short, in order to ensure the normal use of the crossed roller bearings, if shaking occurs during use, it is necessary to stop the machine and check it in time to prevent long-term shaking from causing greater damage to the crossed roller bearings.